2013 Audi RS Q3 Concept in Beijing

May 12th, 2012 | Category: Audi, SUV | 1295 Views

Audi RS Q3 Concept in Beijing – Audi rs q3 now in China is a cyclic four car manufacturers in Beijing Motor Show later this month, announcing the concept of luxury with an elegant design RS Q3. Audi showed their appreciation to the hospital from any decent car label, starting with the powertrain excellence. In this case, RS Q3 set at 5.2 seconds from zero to 62 hours and only 360 horsepower, has a 2.5-liter TFSI turbocharged five-cylinder engine and the same is available in the TT RS. Power train is equipped with quattro all-wheel drive full-time and S tron ??ic 7-speed dual clutch transmission. Also pumping softroader, Audi equipped with styling cues on the theme of a highly sophisticated dual RS, including a black honeycomb grille that, especially with three-dimensional appearance. This concept has been updated with the air intake grill graping bumper has a satin finish and polished aluminum trim around, colored lights and also has been said. Q3 is equipped with large 20-inch aluminum alloy wheels coupled with a ride height has been dropped by a full inch smaller.

2013 Audi RS Q3 Concept in Beijing

2013 Audi RS Q3 Concept in Beijing

Rs Audi q3 has several functions dark blue Alcantara inserts that are enclosed in nappa leather insert in the paper, the concept of RS Q3 is stored as an exception to the high class, to display black out the entire theme. Appears again in the form of entering the door to integrate the same dark blue blue light-emitting glass fiber. To view a diagram of the high resolution of the RS concept Audi Q3 and read the press release hit the jump for Audi hesitate to click on the picture above.

Q3 RS Concept Auto China 2013 in Beijing, RS Audi Q3 presents a vehicle with a theme based on Q3 was a very glamorous look of the SUV. Systematic dynamic is a very special Audi display, to interpret the character of a compact SUV. RS Audi Q3 concept is painted blue thrilling theme-based vehicle dynamic performance. Machines, and 265 kW (360 hp) 2.5 TFSI in the body – down about 25 mm (0.98 inches), extending sharp visual detail Q3 model series exploring the possibility of new ways.

2013 Audi RS Q3 Concept

2013 Audi RS Q3 Concept

Single frame radiator grille of the Audi RS Q3 aluminum trim with a satin finish and highly polished concepts and modern detail. Its black grille insert, showing the new geometry – creates a slightly different three-dimensional honeycomb effect, has been offset from each other in deeper water. Signature quattro – Silver at the bottom of the grill area is to integrate the different functions of a statue. Headlights are a little colored. Among them, covered with panels (CFRP) or carbon fiber reinforced polymers, some of the dark chrome. Bumper, you will be redesigned, there is a strong advantage in the outside air intake. They are divided into two segments – on the outside is made with CFRP, on the inside, we have put in a honeycomb screen when you are in a smooth funnel shape. Front spoiler made of CFRP. The underside is matte black. Bumper at the bottom of the whole coated with a clear blue paint.

Cut the strips in the door and the threshold, the add-on part of the wheel housing – the same combination of black and blue area is repeated on both sides of the RS concept Audi Q3. The door mirror housing consists of CFRP frame matte black aluminum trim between the side windows. Run away to the roof spoiler, rear, center which has been shortened slightly compared to the outside. A slightly yellowish blue mat – has been painted in blue body color Ordos. At the rear, the bumper at the bottom of the section, has a sporty style and angle. Diffuser insert that integrates the two large oval exhaust pipes with a distinctive look of the RS, has been shifted to the top so far. Once again, Audi designers chose a combination of blue and black coat clear CFRP. Rear bumper lights and additional lights have been painted anthracite, is made of transparent glass.

Blue and black interior of the Audi RS Q3:
In roofliner, majority floor carpets, floor mats, upholstery and leather instrument panel inside of the RS concept Audi Q3 to get a lot of light through the glass sunroof, cool black color is dominant, which consists of fine nappa leather. Dark blue Alcantara is used as a contrasting element to the cover sheet. Panel material has been produced by weaving a bright blue light-emitting glass fiber in it contrasts with the color blue has been used in the method of this invention in CFRP decorative panel. Steering wheel, has a large-scale control rods made of CFRP surrounded by aluminum accents. Leather hand grip provides a secure, repel dirt very well most of the wheel covered with leather and an elegant black velvet luxury. The neat door trim panels, there is blue Alcantara aspects that will make your eyes amazed. The inner door handles, having the appearance of light falling all RS models. The tachometer, the Chinese characters, instead of the normal Arabic numerals. RS badge Q3, adorn the instrument cluster, seat backs, door plates and carpet.Styling from the engine compartment is also a very sporty appearance. Multilayer carbon trim panel covers an area of ??about five-cylinder sports engine red valve cover, ventilation screens, you can supply air to the engine is placed in the lateral direction of the two. Because it is a car racing practice, the number of cylinders marked to cover the spark plug. Aluminum housing holds an open-top sports air filter, air filtration tube made of stainless steel.

Powerful drive train:
A powerful 2.5 TFSI, Audi RS technology combines two classic concept Q3 – gasoline direct injection and supercharging. Of 2480 cc displacement, it generates electricity (360 hp) 265 kilowatts. Threw the car, which will thrust the maximum speed (164.66 miles per hour) from 265 kilograms per hour itself (62.14 miles per hour) 100 km / h in 5.2 seconds from zero. Tron ic seven-speed S, then transfer power to the loud 2.5 TFSI quattro permanent all-drive wheel. In general, to demonstrate this power almost exclusively to the front wheels. Variables to be – If slip is detected, in which you can distribute power to the rear wheels via an electronically controlled clutch hydraulic multi-plate. Alloy wheels Audi RS concept will continue to Q3 RS dynamic styling, it has a 8.5 J x 20 dimension. The two sides when it was sandblasted, the front surface is a high gloss. Tire size of 255 is 30 minutes is typical, but certainly not the SUV RS accurate models.

Posted by: Neo Anderson
Title: 2013 Audi RS Q3 Concept in Beijing
Rating: 98% Based on 99889 Ratings. 90800 user reviews.
Reviewer: Neo Anderson

Related Posts

Leave a Reply