Replacing the gear shift knob. The whole process, step by step

Replacing the gear shift knob is a straightforward task that any driver can manage without the assistance of a mechanicAMP. Knowing when and how to replace the gear knob is essential.

The gear shift knob, although typically constructed from durable materials, is susceptible to damage, much like other components such as the steering wheel. Due to frequent use, the gear knob is prone to wearing out relatively quickly.

It’s crucial to distinguish between replacing the knob and replacing the entire gear stick. The latter is a more intricate process that demands at least basic mechanical skills. If you encounter issues like looseness, difficulties shifting gears, or a failure to engage gears properly, it’s advisable to consult a mechanic, as the problem likely extends beyond the knob.

Knowing when to replace the gear knob is often prompted by wear and tear. Mechanical damage, including abrasions, scratches, or other defects, can impact the interior’s aesthetics and diminish the joy of driving. A worn or cracked knob, along with a rod showing signs of wear, can deter potential buyers.

Accumulation of dust on the gear knob is another reason to consider replacement. The rod bellows is one of the dirtiest interior elements, especially in older cars, and cleaning it can be challenging. For those aiming to maintain the car’s appearance, including this element in minor detailing work is advisable.

How to Change the Gear Shift Knob: Step-by-Step Guide

1. Remove the Knob
   Swapping out the gear shift knob is a straightforward task that doesn’t require professional assistance. Most cars allow for easy unscrewing with bare hands or, if necessary, a screwdriver. Some vehicles may require gently prying the knob using a blunt flat plastic tool to avoid scratching the materials.
2. Take Off the Bellows
   Next, remove the bellows. In certain cars, such as older VAG models, the bellows mounting element can be unscrewed with a screwdriver. However, in most cars, the bellows base is attached to the center tunnel. Use a blunt plastic tool to pry off this part.

Depending on the manufacturer, the shift knob bellows may be secured with latches, staples, or other fasteners, all of which need to be unfastened or pulled out. Remove the bellows by reversing it along the rod. Once removed, you can thoroughly clean, wash, or replace it with a new one.

3. Assemble the Entire Set
   Just like replacing the selector knob, installing a new bellows is also straightforward. Stretch the new element onto the bar and attach it in the same manner as the original mountings. Clamping tapes (commonly known as zip ties) or an upholstery stapler can be helpful for this purpose.

The final step in caring for or replacing your shift knob is to put the entire set in place. Secure the attached bellows with the factory casing, press the knob, and tighten it if necessary, especially if there are screws in the mounting. The entire operation should take no more than about an hour.

Brake Fluid Change: Which brake fluid should I choose and how should I check its level?

The functioning of each vehicle relies on the action of various fluids, including oils, windshield washer fluid, or air conditioning agents. Among them, brake fluid holds particular significance, as it…

Seized brakes. How do you deal with a blocked braking system?

Seized brakes pose a significant issue, greatly impacting a vehicle’s performance and safety. Fortunately, resolving this problem can be achieved quite easily, without the need for a mechanic’s assistance. Learn…